[Pre-Order] Neo65 Custom Mechanical Keyboard (Case)

This is CASE ONLY for Neo65, please add the PCB + PLATE from here and checkout together as a set.

Kindly reminder for customer that wants to go for the PLATELESS configuration for Neo65, do checkout with SOLDER PCB.

Press here to checkout for Neo65 Extra Parts.

Click here for NEO65 Build Guide and Resources

Pre-order period: until 30th April

Estimated fulfilment: 2 months after pre-order ends

Further notes and instructions:

1. Oxidation of brass and copper weights is unavoidable due to the characteristics of these materials. If you are concerned about this, please choose the PVD stainless steel weight instead.
   
2. Chroma and Dusk are random mixes of gradients, so the result on each unit may vary.
   
3. The tri-mode PCB on this sale page comes with a pair of 2200mAh batteries.
   
4. All PCBs support VIA.
   
5. Any incomplete orders (i.e., ones without a plate (unless plateless), PCB, or other essential parts of the keyboard) will be canceled.
   
6. The product renders on this page are for reference only and may differ from the actual product color. Color variations between the renders and the physical products are not considered a quality issue and won't be accepted as reasons for returns or refunds. We recommend watching various review videos before purchasing to see how the item's color may appear under different lighting conditions.

Unibody Case

Our design code is based on minimalism. The Neo 65 features an ultra-slim side bezel that blends seamlessly with any desk setup, regardless of the theme.

Neat Side Profile

We chose an inward-sloping edge to complement the minimal design on the front. This also makes it easier to pick up the keyboard.

Brass Weight with Orbit Engraved Logo

The name Neo not only refers to the designer but also represents Near Earth Objects.

We opted for the orbit as the logo for the Neo series to symbolize the interconnection and alternation of our products.

Dual-Mounting System

• Support both PCB gasket mount and gummy O-ring mount (not compatible with plateless configurations)
• With our specially designed gaskets, the PCB and plate can be securely held in place, even if the case is flipped upside down
• Finely-tuned sound profile - no hollowness nor case ping without the use of any foam
• Reserved groove for the O-ring at the blocker - no need to forcefully bend the O-ring anymore, so the assembly experience can be more efficient and enjoyable
• O-rings with different stiffness levels are available to provide varying typing feedback

Selective PCBs

• We selected the 1.6mm PCB without flex cut to achieve a louder and fuller sound profile
• All PCBs are QMK-based, VIA supported (*advanced feature in ANY key is not supported)
  • LS(, RS), LC(, and RC) can work fine in wired mode, but may not work correctly in wireless mode when held briefly and pressed together with another key.
• Three PCB options:
  • Tri-mode Hotswap
    • Support wired, Bluetooth, and 2.4GHz connection
    • Support both ANSI and ISO layout
    • NKRO
    • Polling rate: 1000Hz in wired and 2.4Ghz mode; 125Hz in BT mode
  • Solder
    • Support both ANSI and ISO layout
    • USB-C connection only
    • NKRO
    • Polling rate: 1000Hz

• Wired ANSI Hotswap
  • Per-key RGB
  • ANSI layout
  • USB-C connection only
  • NKRO
  • Polling rate: 1000Hz

Plates with Distinctive Characters

• Hard ———————————————> Soft:

  Carbon Fiber > Aluminum > FR4 > POM > PC

• Clack ———————————————> Thock:

  Carbon Fiber > Aluminum > FR4 > POM > PC

Specifications

• Typing angle：8 degree
• Front height：17mm
• **Size：**310.35mm * 107.8mm
• Weight：
  • Before build：0.97kg
  • After build：1.32KG

Color Options

• Case

• Weight

Content List

• Case
  • Including one pre-installed external weight
  • Two 2200 mAh batteries will be installed inside of the bottom case for orders with Tri-mode PCBs
  • Orders with wired PCBs will receive fillers for the battery compartments
• PCB Kit
  • PCB of your choice
  • 1x PE sheet
  • 1x PCB Foam
  • Standoffs
  • Tri-mode PCB comes with a 2.4Ghz dongle
• Plate of Your Choice (or Plateless)
• Poron Case Foam
• PCB Daughterboard - installed
• Silicone Gaskets
• O-ring (50 duro) x 1
• Rubber feet in grey and black
• Weight screws in silver and black
• Daughterboard FPC cable
• Free Gifts (Disclaimer: If any of these gifts are missing or damaged, they will not be re-shipped or replaced):
  • Keyboard carrying case
  • 1x Hex screwdriver
  • 1x Philip screwdriver
  • 1x Keycap & Switch puller
  • 1 set of 65% PCB clip-in NeoStab
  • USB-C cable