QwertyKeys has come a long way in a relatively short time – back in 2022, they released their first board, the QK65, officially launching the brand, and have continued to make customizable mechanical keyboards accessible to more and more people, regardless of budget. Now, almost two years later, they’re introducing a new generation of their milestone project – the QK65v2!
Seeing as how the original QK65 had a very safe and minimalist design, the QK65v2 incorporates the LCD screen and badge/bezel customization featured on the QK100, letting it stand out and giving it more of its own identity. Other changes include moving the boards cosmetic LED strip to the top left corner of the board, and an accent that exposes the bottom case on the front side of the board, rather than the back. Internally, the board has seen some revisions, with both top and gasket mounting supported for the build process, and featuring the positively received magnetic PCB connectors, obviating the need for internal cable management. Additionally, a clip-in mechanism has been incorporated in the case design, allowing the QK65v2 to be disassembled in a matter of seconds simply by popping off its feet and releasing the clips.
*NOTE: This is a Barebones Kit. All QK65v2 comes as a fixed configuration. All kits come with POM Plate only.
Extras plates and add-ons can be found here (click here)
Case Contents
– Case (top+bottom+weight)
– 2x 2200mAh batteries (pre-installed)
– PCB (inc. PE sheet + PCB foam + standoffs)
– 2.4Ghz dongle
– Plate
– 2x Poron case foam (2.5mm + 1mm)
– PCB daughterboard (pre-installed)
– Screen + daughterboard (pre-installed)
– Silicone gaskets
– 2x feet kit (grey + white)
– Backup screws
– Backup rear and front clips
Gifts (not subject to replacement or refund)
– Keyboard carrying case
– Screwdriver
– Keycap + switch puller
– Set of 65% clip-in NeoStabs
– Coiled USB-C cable
Layouts
All our orders are carefully processed from our physical store in Subang Jaya!
FREE SHIPPING *(Min. Spend RM150)
West Malaysia | Ninjavan - 2-4 Working Days
East Malaysia | Ninjavan - 3-6 Working Days
INTERNATIONAL
Singapore | Teleport - 2-4 Working Days
Rest of the World | DHL Express - 2-4 Working Days
Grab Express/Lalamove
Please mark the order as self-pickup and let us know the tracking.
Order Cut-Off Time: 6PM
Where are the Keycaps and Switches?
Barebones Kits come without Keycaps and Switches to allow you to choose how you want your board sounds and feels down to each individual key.
Need a starting point? Check out our recommendations in the Configurator!
QwertyKeys has come a long way in a relatively short time – back in 2022, they released their first board, the QK65, officially launching the brand, and have continued to make customizable mechanical keyboards accessible to more and more people, regardless of budget. Now, almost two years later, they’re introducing a new generation of their milestone project – the QK65v2!
Seeing as how the original QK65 had a very safe and minimalist design, the QK65v2 incorporates the LCD screen and badge/bezel customization featured on the QK100, letting it stand out and giving it more of its own identity. Other changes include moving the boards cosmetic LED strip to the top left corner of the board, and an accent that exposes the bottom case on the front side of the board, rather than the back. Internally, the board has seen some revisions, with both top and gasket mounting supported for the build process, and featuring the positively received magnetic PCB connectors, obviating the need for internal cable management. Additionally, a clip-in mechanism has been incorporated in the case design, allowing the QK65v2 to be disassembled in a matter of seconds simply by popping off its feet and releasing the clips.
*NOTE: This is a Barebones Kit. All QK65v2 comes as a fixed configuration. All kits come with POM Plate only.
Extras plates and add-ons can be found here (click here)
Case Contents
– Case (top+bottom+weight)
– 2x 2200mAh batteries (pre-installed)
– PCB (inc. PE sheet + PCB foam + standoffs)
– 2.4Ghz dongle
– Plate
– 2x Poron case foam (2.5mm + 1mm)
– PCB daughterboard (pre-installed)
– Screen + daughterboard (pre-installed)
– Silicone gaskets
– 2x feet kit (grey + white)
– Backup screws
– Backup rear and front clips
Gifts (not subject to replacement or refund)
– Keyboard carrying case
– Screwdriver
– Keycap + switch puller
– Set of 65% clip-in NeoStabs
– Coiled USB-C cable
Layouts
All our orders are carefully processed from our physical store in Subang Jaya!
FREE SHIPPING *(Min. Spend RM150)
West Malaysia | Ninjavan - 2-4 Working Days
East Malaysia | Ninjavan - 3-6 Working Days
INTERNATIONAL
Singapore | Teleport - 2-4 Working Days
Rest of the World | DHL Express - 2-4 Working Days
Grab Express/Lalamove
Please mark the order as self-pickup and let us know the tracking.
Order Cut-Off Time: 6PM
Where are the Keycaps and Switches?
Barebones Kits come without Keycaps and Switches to allow you to choose how you want your board sounds and feels down to each individual key.
Need a starting point? Check out our recommendations in the Configurator!
Looking for manuals, firmware or software files?
FInd them over in our download center!