Venom HE H88 F13 PCB
Type : Hall effect
Material : FR4
Thickness : 1.6mm
To change key settings, refer to this page:
Key Setting
Compatible Switches
GEON Raw HE Switch
GEON Raptor HE Gaming Switch
Keep in mind
PCB does not include a JST cable and screws.
Plates include screws compatible with Venom PCBs.
O-rings must be used on F1-8X / F2-84 Keyboard kits.
Tadpoles must be used on Frog TKL F12 / F13 Keyboard kits.
All products are made in the size of Hiney H88c/H88nu, which is the standard in the custom keyboard sector.
Before you start assembling the PCB, please carry out a PCB test and check if all keys function.
Before assembling the screws, remove the yellow tape on the stand-offs of PCBs.
Whether or not to use foam sets is optional.
Cut the space bar area of the foam set to fit your keyboard layout.
To assemble the PCB and the plate, you must use all 14 screws.
After removing the C-type port once, you cannot put it on again.
Remove the daughter board installed above the arrow keys before usage, since electricity may go through.
Daughter board and C-type ports are made of FR-4, which means you must use a nipper. If you use tools made for other uses such as scissors, the product may be damaged.
These PCBs, such as photos, are not eligible for exchange or refund.
The stabilizer mounts normally.
All our orders are carefully processed from our physical store in Subang Jaya!
FREE SHIPPING *(Min. Spend RM150)
West Malaysia | Ninjavan - 2-4 Working Days
East Malaysia | Ninjavan - 3-6 Working Days
INTERNATIONAL
Singapore | Teleport - 2-4 Working Days
Rest of the World | DHL Express - 2-4 Working Days
Grab Express/Lalamove
Please mark the order as self-pickup and let us know the tracking.
Order Cut-Off Time: 6PM
Where are the Keycaps and Switches?
Barebones Kits come without Keycaps and Switches to allow you to choose how you want your board sounds and feels down to each individual key.
Need a starting point? Check out our recommendations in the Configurator!
Venom HE H88 F13 PCB
Type : Hall effect
Material : FR4
Thickness : 1.6mm
To change key settings, refer to this page:
Key Setting
Compatible Switches
GEON Raw HE Switch
GEON Raptor HE Gaming Switch
Keep in mind
PCB does not include a JST cable and screws.
Plates include screws compatible with Venom PCBs.
O-rings must be used on F1-8X / F2-84 Keyboard kits.
Tadpoles must be used on Frog TKL F12 / F13 Keyboard kits.
All products are made in the size of Hiney H88c/H88nu, which is the standard in the custom keyboard sector.
Before you start assembling the PCB, please carry out a PCB test and check if all keys function.
Before assembling the screws, remove the yellow tape on the stand-offs of PCBs.
Whether or not to use foam sets is optional.
Cut the space bar area of the foam set to fit your keyboard layout.
To assemble the PCB and the plate, you must use all 14 screws.
After removing the C-type port once, you cannot put it on again.
Remove the daughter board installed above the arrow keys before usage, since electricity may go through.
Daughter board and C-type ports are made of FR-4, which means you must use a nipper. If you use tools made for other uses such as scissors, the product may be damaged.
These PCBs, such as photos, are not eligible for exchange or refund.
The stabilizer mounts normally.
All our orders are carefully processed from our physical store in Subang Jaya!
FREE SHIPPING *(Min. Spend RM150)
West Malaysia | Ninjavan - 2-4 Working Days
East Malaysia | Ninjavan - 3-6 Working Days
INTERNATIONAL
Singapore | Teleport - 2-4 Working Days
Rest of the World | DHL Express - 2-4 Working Days
Grab Express/Lalamove
Please mark the order as self-pickup and let us know the tracking.
Order Cut-Off Time: 6PM
Where are the Keycaps and Switches?
Barebones Kits come without Keycaps and Switches to allow you to choose how you want your board sounds and feels down to each individual key.
Need a starting point? Check out our recommendations in the Configurator!
Looking for manuals, firmware or software files?
FInd them over in our download center!